[. . . ] DIGITAL CAMERA FE-5050/FE-4050 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. We recommend that you take test shots to get accustomed to your camera before taking important photographs. In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. [. . . ] 12), "Charging the battery and setting up using the supplied CD" (p. 13), "Charging the battery with the supplied USB-AC adapter" (p. 15) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. With prolonged camera use, the internal temperature may increase, resulting in automatic shutdown. If this occurs, remove the battery from the camera and wait until the camera has sufficiently cooled. The camera's external temperature may also increase during use, however this is normal and does not indicate malfunction. Monitor "Difficult to see". Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Card/Internal memory "An error message is displayed". 54) Shutter button "No picture is taken when the shutter button is pressed". To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on. EN 53 Date and time function "Date and time settings return to the default setting". If the batteries are removed and left out of the camera for about a day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. 17) Error message CARD SETUP Corrective action Card problem Use FG to select [FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory problem Use FG to select [MEMORY FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory/Card problem Take pictures before viewing them. POWER OFF FORMAT SET OK MEMORY SETUP POWER OFF MEMORY FORMAT Miscellaneous "The camera makes a noise when taking pictures". The camera may activate the lens and make a noise even if no operation is performed. [. . . ] Any defect or damage that occurs due to transport, a falI, shock, etc. Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural disasters, environmental pollution and irregular voltage sources. Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc. ), improper maintenance, etc. When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customer's name, the dealer's name, and the serial number. [. . . ]